Fineness from 150 microns to about 3 mm - 10 minutes time-saving per screen change - Inspection hatches
The Hamex® Hammer Mill has been developed for grinding soft to medium-hard products with Fineness from 150 microns to approximately 3 mm.
In the hammer mill, the free-hanging hammers swing around at a high speed in the grinding chamber. Depending on the properties of the product to be ground, we work with single, double or T-hammers. The centrifugal force that is created in this way smashes the material to be ground against special rupture disks on the inside of the grinding chamber. The ground product then leaves the hammer mill through the exchangeable screen.
With the Hamex® Semi-Automatic hammer mill, the screen, in its holder, is automatically driven out of the machine and then the operator can quickly exchange or inspect it manually. The rotor can continue rotating during this operation, which saves you around ten minutes of production time per screen change. That is the time it normally takes for the rotor to come to a standstill. This saves a lot of time if you want to change products regularly.
Thanks to the robust design and the relatively low speed of up to 1800 RPM, the noise level is minimal. This is both nice for the operator and good for reliability. In addition, the Hamex® Semi-Automatic hammer mill is equipped with large inspection hatches that provide quick and easy access for inspection, cleaning and maintenance of the relevant parts.
Would you like to know how the Hamex® Semi-Automatic hammer mill could add value in your process? Feel free to contact one of our specialists by sending an email to email@example.com or calling +31774673555, without any obligation.